Undercounter glasswashers and dishwashers
Compact units for bars, cafés and small kitchens with limited rack volume.
A commercial dishwasher is a high-throughput warewashing machine that cleans and sanitises racks at a controlled rinse temperature, unlike a domestic appliance. Hood, undercounter and rack conveyor dishwashers plus washing and sterilisation equipment for busy professional kitchens.
Applicable buyers: Restaurant chains, hotels, central kitchens
CE and UKCA are the conformity schemes commonly referenced for EU/UK projects. This is a requirement note, not a statement that a certificate is held; copies and model scope are provided on request.
Warewashing is a throughput bottleneck. Size the machine from racks per hour at peak service, then check water, drainage, electrical supply and table space on both sides.
The model list is to be confirmed. These are the configuration families buyers most often request; send your required capacity and we will match them to current models.
Compact units for bars, cafés and small kitchens with limited rack volume.
The standard for restaurant and hotel kitchens; straight or corner flow with inlet and outlet tables.
Continuous throughput for canteens, hospitals and large banquet operations.
Heavy-duty wash cycles for trays, pots, GN containers and baking sheets.
Values below are typical configuration ranges for the category, not a verified model specification.
| Parameter | Value / configuration |
|---|---|
| Machine type | Undercounter, hood-type pass-through, rack conveyor or pot washer |
| Sizing basis | Racks per hour at peak service; exact throughput confirmed per model |
| Rinse temperature | High-temperature rinse with a verified final rinse temperature |
| Water consumption | Per-cycle consumption confirmed in the model spec sheet |
| Wash tank and filtration | Filtered wash tank with easily removable strainers |
| Power supply | Single-phase or three-phase; voltage configured per market |
| Water and drainage | Hot or cold feed, water hardness recommendation, drain height and slope |
| Dosing | Detergent and rinse-aid dosing pumps, internal or external |
| Construction | 201 stainless steel wash chamber and panels |
| Compliance documentation | CE / UKCA, ETL / UL / NSF as applicable — verified copies on request |
| Verified model values | To be confirmed — supplied in the official spec sheet |
Typical configuration ranges only. Model-specific verified values, dimensions and certificate numbers are supplied in the official spec sheet on request.
Compliance requirements differ by destination. Confirm them before the quotation so the build, documents and price are correct the first time.
CE and UKCA documentation, 220–240V / 50Hz or three-phase supply, and hygiene documentation for the final rinse temperature.
ETL / UL / NSF references as applicable, 110–120V / 60Hz or 208/240V supply, and confirmation of local health-department requirements.
220–240V / 50Hz or 380V three-phase, water-hardness treatment and high-humidity-resistant components.
Send your capacity, voltage, gas or refrigerant requirement and destination port. We will return matched models, compliance notes and a quotation.
Short, direct answers for buyers shortlisting this category.
Use an undercounter unit below roughly a few dozen racks per hour in a small bar or café; use a hood-type pass-through for restaurant and hotel service volumes. Rack conveyor machines suit continuous canteen flow. Size from peak racks, not average daily covers.
Hard water causes scale on the boiler, heaters and wash chamber and reduces rinse performance. We assess your water hardness at specification stage and recommend treatment; the requirement is confirmed with the quotation rather than assumed.
Commercial machines use a high-temperature final rinse for thermal sanitising, with the exact setpoint defined by the model and local health requirements. Ask for the model spec sheet and the hygiene documentation for your market.